100ft Solar String Lights with Remote: An ST38 Buyer’s Guide

Plan a warm-lit backyard, bistro or deck with 100ft ST38 solar string lights. Compare layout, remote control, evening performance and outdoor protection before choosing your configuration.

100 ft (30.48 m) is the total cable length, so request the section dimensions before ordering and check that the lead reaches the first bulb and the first-to-last bulb span covers your intended area.

Planning a warm-lit fence line, a relaxed deck or an outdoor dining area? Start with where the light should begin and end, where the solar panel can charge, and how long the space needs to stay lit. This guide helps you turn those choices into a workable 100ft ST38 specification.

Where Will You Use the Lights?

Backyards and garden boundaries. A perimeter run can frame a seating area without putting every bulb overhead. Mark the first and last illuminated points, then find a charging position for the panel.

Warm-looking string lights tracing a wooden garden fence at night
A fence-line run traces the garden perimeter. Check where the first and last lights need to fall before selecting a cable layout.

Bistros and cafés. Start with the view from the tables and the hours of service. Assess the sample alongside the terrace’s existing lighting so you can judge comfort, useful brightness and access to the controls.

Decks. Follow the usable mounting positions and allow access for bulb replacement. Include separate lighting for steps or other areas where the project requires it.

The Look of 2700K ST38 Bulbs

The ST38 silhouette and specified 2700K warm-white light suit a brief centred on relaxed outdoor seating and dining. Colour temperature describes the appearance of the light. Judge brightness separately at the intended hanging height, including visibility at tables and comfort in the normal line of sight.

Your Starting Configuration

FeatureConfiguration covered in this guide
Total length100ft / 30.48m
Operating bulbs50 ST38 LED bulbs
Spare bulbsTwo additional replacement bulbs
Cable gauge20AWG
Light colour2700K warm white
ControlsRemote control and dimming
Lighting modesSteady On, Pulse and Flash, as labelled in the RF guide
Standard outdoor protectionIP65 solar control box; IP44 light string
Protection upgradeComplete IP65 configuration available
CustomisationSpecifications can be customised; agree the final configuration before sample approval

Use this specification to compare quotations, then add the section dimensions, electrical requirements and selected control-box configuration to the order.

Will 100ft Fit Your Layout?

The 100ft (30.48m) total includes the lead to the first bulb, the illuminated section and any tail after the last bulb. Obtain all three dimensions before choosing the hanging route.

100 ft (30.48 m) total cable length

Lead cableController to the first bulb
First bulb → illuminated section → last bulb50 operating bulbs · 49 gaps between adjacent bulbs
Tail cableLast bulb to the cable end

2 spare bulbs are counted separately. Diagram not to scale. Confirm each section length and the spacing on the approved drawing.

Measure along the cable’s planned path, allowing for drapes, corners and changes in height. A long approach from the solar panel to the seating area uses part of the total length. The park scene below shows why a hanging run needs more cable than the straight-line distance between its supports.

Lit Edison-style bulbs on cables spanning between trees beside a park path
Follow the hanging route, including the sag between supports, when measuring the span.

For 50 evenly spaced operating bulbs, the first-to-last span contains 49 gaps. Once that span is confirmed, divide it by 49 to calculate the spacing. The two spare bulbs are replacement stock and add no installed light points.

Choose the Supports Before the Route

Walls, railings and trees offer different routing possibilities. Use the graphic below to discuss the intended arrangement, then select supports and fasteners according to the site and the supplied installation instructions.

Three-panel graphic showing string lights at tree branches, wall hooks and a railing
Mounting concepts for branches, walls and railings. Choose supports and fasteners according to the site and the supplied installation instructions.

How Will You Control the Evening?

Remote control, dimming and three lighting modes let you adjust the atmosphere without reaching an overhead string. A bistro may prioritise one consistent setting through service, while a backyard brief may call for different effects for gatherings. Approve the actual three effects and dimming settings with the sample.

Test the remote from the intended operating position, recording distance and obstructions. Try each dimming setting, then switch the set off and back on to check which settings it restores.

RF remote control guide showing 6H and 8H timers, four brightness levels, speed controls and Steady On, Pulse and Flash buttons
RF remote layout reference. Match the supplied remote and controller to the approved configuration. View full-size guide.

The RF guide groups the controls into 6H / 8H auto-off timers, 25%, 50%, 75% and 100% brightness, ON/OFF, speed adjustment and three modes, Steady On, Pulse and Flash. Test the working range and response from your intended position during sample approval.

The PowerHub control-box range includes several mode options, standard IR remote control and optional RF. Record the selected remote type and functions in the final specification for this 100ft set.

Couleelight’s ST38 controls demonstration. Confirm the remote, timer and dimming functions for the 100 ft configuration on the approval sample.

Which Outdoor Protection Do You Need?

The standard configuration pairs an IP65 solar control box with an IP44 light string. For a complete IP65 upgrade, the supporting documents must cover the supplied assembly in its specified assembled state.

Swipe the table sideways to see all columns.

ConfigurationSolar control boxLight stringEvidence to request
StandardIP65IP44Component documentation for the IP65 control box and IP44 string in their specified assembly states.
UpgradedCovered by the specified assemblyCovered by the specified assemblyIP65 evidence for the full assembly as supplied, including mated connectors, fitted bulbs and closed covers as applicable.

The water-protection numeral 4 addresses splashing water and 5 addresses water jets under defined test conditions. Immersion has separate classifications. See the European Commission’s IEC 60529-based IP guide.

Describe the actual exposure when selecting the configuration, including nearby irrigation or cleaning. Keep the control-box and string ratings separate in quotations, retail descriptions and installation documents. For the upgrade, check that the evidence covers the controller, string, sockets, mated connectors, fitted bulbs and closed covers as applicable. Follow the supplied assembly and charging-port instructions.

Can It Cover Your Evening Schedule?

Give the solar panel a charging position as well as giving the bulbs a hanging route. A shaded canopy may suit the seating area while limiting the panel’s solar exposure, so settle the panel location and controller access before approving the cable layout.

Choose a Panel Mounting Position

The guide below illustrates ground-stake, wall-bracket and clip mounting. Choose an open, unshaded spot and angle the solar face towards the sun. Include the mounting hardware for your chosen arrangement in the agreed packing list.

Solar panel installation guide illustrating ground-stake, wall-bracket and clip mounting with an unobstructed view of the sun
Ground-stake, wall and clip mounting arrangements. Use the mounting hardware specified for the selected configuration.

Ground stake

Diagram of a solar panel supported by a stake inserted into the ground

Keep the panel clear of foliage and choose a stable position with direct sunlight.

Wall mount

Diagram of a solar panel attached to an adjustable wall bracket

Secure the specified bracket and orient the solar face towards the sun.

Clip mount

Diagram of a solar panel clamped to the edge of a railing or table

Attach the specified clip to the base and clamp it to a suitable railing or table edge.

For a café, define the service period and useful brightness you need. Evaluate the complete sample under relevant charging conditions, recording the controller and battery, starting charge, lighting mode, brightness and elapsed time until the light becomes too dim for the intended use. This makes a runtime claim meaningful for your venue.

The published PowerHub specifications list a 4.0W / 5.8V tempered-glass panel, solar and Type-C charging, and configuration-dependent battery capacities. Use them as controller-selection references. The battery, charging input requirements and useful runtime of the chosen 100ft combination need configuration-specific confirmation.

What to Approve Before Bulk Ordering

20AWG Cable and Replacement Compatibility

20AWG identifies the specified cable gauge. Extension limits also depend on conductor material, voltage, total load, cable construction and connector ratings. Include any proposed extension in the agreed system specification.

Couleelight offers 3V, 24V and 31V controller output options. Match the selected controller’s voltage, output characteristics, polarity, load and control method to the string. Keep a compatible replacement-bulb reference with the order, including its base, voltage and power.

The product brief describes the bulbs as shatterproof. Record the shell material and relevant durability evidence, together with handling and replacement instructions. Agree an assessment method if impact resistance is an important purchasing requirement.

Use the table below to record the sample reference and any agreed changes. An unresolved item stays open for clarification before the volume order is released.

Swipe the table sideways to see all columns.

Approval areaWhat to check and recordApprove when
LayoutTotal, lead and illuminated lengths; spacing; proposed routeFits the agreed layout and panel position
Pack contents50 operating bulbs, two spares and agreed accessoriesMatches the approved packing list
Light appearance2700K appearance and brightness at intended hanging heightMeets the agreed visual brief
ControlsThree effects, dimming settings and remote operation from the intended positionPerforms the agreed functions
Evening performanceCharging conditions, settings and useful operating periodMeets the agreed nightly schedule
Outdoor protectionComponent ratings for the standard set, or IP65 evidence for the complete upgraded assembly in the documented assembly stateMatches the specified exposure and documentation
Electrical matchString, controller, connectors and any approved extensionsMatches the agreed system specification
Replacement supportBulb reference and compatible replacement partsMaintenance requirements are documented

Plan Your 100ft ST38 Configuration

Share your application, target market and estimated quantity with Couleelight. Add a route sketch or first-to-last bulb span if available, and indicate whether you need the standard IP65-control-box/IP44-string combination or the complete IP65 upgrade. Specifications can be customised around the agreed requirements.